Ø48.6 T:3.2mm Stage scaffolding

Ø48.6 T:3.2mm Stage scaffolding

  • Vertical Connection Tolerance is within 1.8mm
    According to the test result, the loading can reach at least 94% when the maximum allowance is 1.8m; whilst, if the other brand allowance is 3.0mm, the loading only can reach 50%. The higher the scaffold assembled, the less the loading can bear.
  • Vertical Connection is Through” Cross Section”, rather than “Point”.
    We use high-precision circular sawing machines to ensure the tubes are cut precisely. This allows for no visible gap between the tube connections, making the cross sections of our tubes are perfectly smooths.
  • Vertical Deviation at 0.3%
    It is on par with ACI 117-06, the permanent concrete structure which below 25.4m height, the vertical deviation need to be controlled within 0.3%, the less vertical deviation, the less influence on eccentric bending moment.
  • High Tensile Steel STK500 & Hot Dip Galv.
    The tubes are made of high tensile steel “STK500”, precise specification. All the components are hot dip galvanized for longevity use. Ring System Scaffolding complies with EN 12810-1 certification which is your reassurance that it is the best of the quality.
Vertical Main support of the entire system connected by Spigot.
  • Material: STK500
  • W/ Hot Dip Galv.
  • Length: 1.0m;1.5m;2.0m;3.0m
  • Pipe: Φ48.6mm
  • Distance between Rings:500mm
Horizontal To distribute force evenly between Verticals.
  • Material: STK500
  • W/ Hot Dip Galv.
  • Length: 0.9m;1.2m;1.5m;1.8m
    Other sizes are also available
  • Pipe: Φ48.6mm
Diagonal To enhance the load-carrying capacity and keep the entire system from deformation.
  • Material: STK500
  • W/ Hot Dip Galv.
  • Length:
    1.2m×1.5m;1.5m×1.5m;1.8m×1.5m
    Other sizes are also available
  • Pipe: Φ48.6mm

This British Standard is the official English language version of EN 12810-1:2003. It supersedes BS 1139-5:1990 which is withdrawn. Therefore, EN 12810-1: 2003 has replaced the BS 1139-5. If you are still looking for BS certified products, our EN certificate also meets your requirement.

Certificate
  • ISO-9001
  • EN 12810-1
  • ANSI/ASSE A10.8
Test Report
  • Material Certification
  • Magnetic Particle Test
  • Loading and Tension Test
  • Third Party Professional Lab